If you love quartz watches, do you know how to replace the battery?

    Recently, many friends have asked us how to replace a quartz watch battery and whether there are any potential “after-effects”. Today, let us discussQuartz watchesquartz watches. Unlike mechanical watches, quartz watches rely on a battery to power their timekeeping. Consequently, a quartz watch requires battery replacements to ensure sufficient power, whereas a mechanical watch does not.

　　Standard procedure for replacing a quartz watch battery:

　　1 First, open the case.

　　2 Next, carefully remove the battery and insert the new battery.

　　3 At the same time, inspect the other components to ensure they are in good condition.

　　4 Replace the waterproof gasket at the same time if possible.

　　5 Close the case and test the water resistance.

　　6 Finally, set the correct time, then check the cleanliness and operation of the reassembled watch.

　　Specific steps for replacing the battery:

　　1 Use bamboo or plastic tweezers to handle the battery. Remember to wear gloves to prevent static electricity from hands causing a short circuit.

　　2 When removing the watch battery, note the correct orientation of the positive and negative terminals.

　　3 Wipe the battery clean. Before installing the new battery, check the positive and negative contact points for dirt. If dirty, clean them with alcohol.

　　4. Pay attention to the orientation when installing the battery. When fitting the battery, mind the positive and negative directions and do not install them in reverse.

　　A standard quartz watch battery typically lasts at least a year and does not require frequent servicing like a mechanical watch. Consequently, quartz watches are exceptionally simple and convenient to wear and use.