How to adjust a Geya watch bracelet

　　Geya is a domestic watch brand known for its excellent quality and affordable prices. As a result, they are quite common in the market, but many Geya watch owners find the bracelet a bit too long. Below, I will show you how to remove the bracelet from a Geya watch!

　　How to remove a Geya watch bracelet

　　Before removing any links, measure roughly how many links need to be removed to get the right fit.

　　1, detach the bracelet from the clasp so that it can lie flat on the table. This will make the next steps easier. It is best to place a piece of velvet cloth underneath to protect your watch.

　　2, once the bracelet is laid flat, use a pointed tool, such as a spring bar tool (in this case, a small pair of scissors), to locate the pin by following the arrows on the back of the bracelet. Press against the small circular protrusion and push in the direction of the arrow.

　　3, after removing the pin, gently twist the link at the gap to separate the bracelet.

　　4, to remove a single link, you must remove both pins at either end of the link.

　　5, once you have removed the required number of links, you can reassemble the bracelet. The pin holes might be a bit tight, so use something with moderate hardness (I used a plastic lighter) to tap them back in gently, or push firmly to reinsert. Remember to reattach the clasp as well.

　　Precautions for watch maintenance

　　1. Do not use the watch in hot baths, saunas, or environments with significant temperature fluctuations (including water-resistant watches).

　　2. Do not operate the watch buttons or adjust the crown while underwater.

　　3. Please clean the bracelet and case regularly; for leather straps, avoid contact with water, moisture, and cosmetics, and keep them out of direct sunlight.

　　4. Please keep the watch away from magnetic fields; avoid prolonged proximity to electrical appliances, mobile phones, and magnets.

　　5. Do not disassemble the watch under any circumstances.