wr30m How do I use a digital watch?

　　WR30M Digital watches have a simple design and practical functions. They are a popular choice for many outdoor enthusiasts. However, some friends have mentioned that they are not quite sure how to use this digital watch. Below, I provide the WR30M digital watch user manual!

　　Stopwatch:

　　In normal mode, press the MODE button to activate the stopwatch, press the SET button to reset the stopwatch display to 0:00, then press the UP button to start counting. Press MODE to return to normal mode.

　　Remove the plastic film from the battery cover, and the digital clock will enter normal mode. In normal mode:

　　1. Press the UP button to display the date.

　　2. Press the SET button to display the alarm time.

　　Alarm setting

　　1. In normal mode, press the MODE button twice.

　　2. The hour position will flash; press the UP button to adjust the alarm hour.

　　3. Press the SET button to proceed to the minute setting, and press the UP button to change the minutes.

　　4. Press the MODE button to return to normal mode

　　5. To turn off the alarm, press the SET or UP button

　　6. To cancel the alarm function, press and hold the SET button, then press the UP button to cancel. (Press and hold = long press)

　　Generally, pressing and holding the bottom-right button while pressing the bottom-left button toggles the hourly chime; pressing and holding the bottom-right button while pressing the top-right button is for the alarm

　　Time Setting

　　1. In normal mode, press the MODE button three times

　　2. Then press the SET button once, the minute digits will start flashing, press the UP button to adjust the minutes.

　　3. Press the SET button to proceed to the hour setting, and press the UP button to adjust the hour

　　4. Press the SET button to move to the date setting, and press the UP button to adjust the date

　　5. Press the SET button to move to the month setting, and press the UP button to modify the month

　　6. Press the MODE button to return to normal mode