What is the difference between a replica watch and a genuine watch?

　　Introduction: The replica watch market is a mixed bag, and nobody wants to spend a high price on a fake luxury watch. However, a fake is still a fake, and they can still be told apart with careful observation. Join us below to learn how to distinguish replica watches.

　　True fine watches never leave buyers with any regrets, with every detail from the exterior to the movement being exquisitely finished to a touching degree. Thus, luxury watches truly achieve value for money. At the same time, however, counterfeit pieces have slowly begun to flood this relatively small market. Replica watches can be distinguished through the following aspects:

　　1、LOGO

　　The most easily exposed feature of a fake watch is generally the logo, especially the dial logo. You can inspect the workmanship closely using a 4x loupe. On a genuine piece, a metal logo usually looks bright and new, whereas a fake logo has rough edges and some irregularities. If it is painted lettering, the edges on a genuine watch are smooth without burrs, while a fake has slightly smeared edges around the painted letters with inconsistent font depth, which can be clearly seen under an eight-power loupe.

　　2, Crystal

　　Prestigious watches generally use sapphire crystals. With technological advances, counterfeit watches have also begun to imitate this. Fake watches using sapphire are usually easy to spot because counterfeiters, in order to reduce costs, do not apply an anti-reflective coating to the crystal, let alone a double-layer coating. Consequently, reflections under light are severe. Even though water beads up on it, shining an ultraviolet light reveals extremely severe reflections. Genuine watches, thanks to their anti-reflective coating, show minimal reflection under intense light and exhibit a purple or blue glare.

　　3, Weight

　　Nowadays, replica watches—particularly Rolex replicas—often use lead rings inside to ensure the watch has a realistic weight. However, you can test the weight of other parts, such as the bracelet, which will feel considerably lighter. At the same time, fake watches generally feel lighter overall, and even with lead rings used for ballast, the feel in the hand remains unusual.

　　4, Crown

　　Generally speaking, the crown is where fake watches are most likely to give themselves away. Fake watches tend to use a uniform manufacturing process, resulting in uneven polished and plated areas—whether chromium or gold plating—with noticeable variations in depth and patches of exposed base metal visible upon close inspection. If the case is made well enough that it is not easily detected, you can inspect the crown section closely. Furthermore, the crowns of many prestigious watches adhere to specific dimensions, whereas fake watches are almost all identical; this is easily spotted by looking at genuine watches frequently.

　　5, Case back

　　The case backs of replica watches are not produced according to the specifications of luxury watches. Some (such as OMEGA, AP, etc.) substitute screw-down case backs with snap-on ones, which interested friends might want to note. Certain watch case backs feature octagonal designs or multiple screws; to cut costs, replica manufacturers produce incongruous snap-on backs shaped like screw-down ones.

　　Summary: The above covers everything on authenticating an Omega watch. Many people want to buy an Omega but are afraid of getting a counterfeit, so be sure to read the above points carefully.