How to adjust the date and time on a replica IWC watch?

　　IWC remains a brand that manufactures watches using traditional watchmaker craftsmanship, without devolving into an industrial revolution-era factory like other watch brands. Furthermore, IWC has never pursued mass production. To this day, it adheres to IWC's inherent philosophy: making a small quantity of exceptionally high-quality watches. Consequently, every single IWC watch is meticulously crafted down to the finest detail! This is also one of the reasons why many watch enthusiasts purchaseReplica IWC watchesone of the reasons. However, quite a few friends do not know how to adjust the date and time after purchasing an IWC watch. Below, Biao Li Ru Yi will explain how to do it!

　　replica IWC Portofino series automatic mechanical watch IW356505

　　1, first pull the crown out to the manual setting position, then turn the hands clockwise until the date changes to the next day. If the watch has already stopped running, it is difficult to determine whether the hands are showing a.m. or p.m., but you can note that when the date changes to the next day, it indicates midnight 12 o'clock.

　　2, turn the hour hand past midnight for at least 6 hours (i.e. 6 a.m.) before adjusting the hands. Using the quick-set mechanism for the date function, you can adjust the watch to yesterday's date. The watch's date function operates normally between 8 p.m. and 3 a.m., and adjusting the date during this period will damage the movement's performance. 6 a.m. is not a date-change time, making this time period most suitable for adjusting the date.

　　3, push the crown back to the normal position to activate the movement, then pull the crown out again to the manual setting position to adjust the second hand to the 12 o'clock position. At this point, you can use a time signal to set the watch time precise to the second.

replica IWC Portugieser Seven Days Power Reserve automatic mechanical watch

　　4, turn the hands clockwise until the date displays today, then adjust the time to about 5 minutes ahead of the actual time. If the current time is past midday, make sure to turn the hour hand past the 12 o'clock position. By checking whether the date turns, you can confirm whether the displayed time is around midday. Furthermore, this method ensures that setting the time between 12 o'clock 30 minutes and 3 a.m. midnight will not damage the date mechanism.

　　5. Now turn the hands to be one minute ahead of the exact time, and as soon as the exact time is reached, press the crown back in to restart the watch (if the watch is fitted with a screw-down crown, you will need to screw the crown down tightly). Setting the date and time involves the dynamic movement of teeth within the gear train, typically where the teeth of two wheels interlock to allow the wheel to rotate freely and prevent jamming. When the watch is running normally, it means the dial gear train is moving forward evenly in the same direction; at this time, the dynamic changes of the teeth are not very noticeable. However, if you pull the crown out to the manual setting position and adjust the hands forwards and backwards, every time you change the direction of winding the crown, you will notice the dynamic changes within the gear train. In addition, when you pull the crown out or push it in, another wheel immediately interlocks with the wheels of the gear train, causing a noticeable dynamic change. For example, when you set the watch with a "forward" motion and push the crown in, you will feel the minute hand jump slightly. After completing the above setting procedure, your IWC watch will run smoothly and accurately display the time and date.