Do automatic mechanical watches need servicing?

　　Do automatic mechanical watches need servicing? Many people have this question. Automatic mechanical watches are a type of mechanical watch, and using them requires us to pay attention to daily maintenance work. So how should automatic mechanical watches be maintained? Below, Xiaoya tells you the methods for maintaining automatic mechanical watches, and everyone is welcome to learn.

　　Automatic mechanical watch maintenance methods

　　(1) Fully wind the watch mainspring at regular intervals every 24 hours.

　　(2) When setting the time on a mechanical watch, the hands can be turned either forwards or backwards.

　　(3) If the timekeeping is fast or slow, the regulator index on the back of the watch can be adjusted. Move it towards the '-' direction if the watch is running fast, and towards the '+' direction if it is running slow. Moving it by 1 graduation adjusts the time by 3-5 minutes.

　　(4) To use the alarm, first align the alarm disc time with the alarm arrow, then fully wind the alarm spring. Each full wind allows the alarm to sound once. For a second use, the alarm must be rewound an hour and a half after it has gone off.

　　(5) To silence the alarm, push down the stop button on top-bell alarm clocks, or flick the silencing lever on twin-bell alarm clocks.

　　(6) The watch should be kept clean and should not be placed in damp, dusty, high-temperature, or strong magnetic environments.

　　(7) Avoid severe impacts and vibrations, and protect the watch from acidic and alkaline chemical corrosion.

　　Automatic mechanical watch maintenance tips

　　1, places where watches are stored should avoid using mothballs and insect repellents, as their chemical substances continuously emit and break down the watch's lubricating oil, easily causing watch malfunctions.

　　2, try not to let the watch get damp to avoid strap deformation; placing it near magnetic items will also affect the watch's accuracy. In addition, even water-resistant watches should avoid immersion in water, and whenever a watch has been soaked in water (unless it is a diving watch), it is best to have it inspected.

　　3, it is best to send the watch to the original agent for servicing every one to two years to extend its service life. Maintenance items include inspection, cleaning, oiling, and timing calibration.

　　4, when the watch stops running, the battery should be replaced as soon as possible. If it is not used for a long time, you should ask a watchmaker to remove the battery and store it in a dry place to avoid electrolyte leakage and corrosion of the watch movement.

　　Place in a dry and cool place, away from sunlight and water immersion. Generally speaking, there will be no problems.

　　If a mechanical watch is not worn for a long time, the watch oil will gradually solidify, and the lubricity of the components will decrease. If it does not run for a long time, the internal components of the case will stick together, which will increase wear when it is used again. It is best to buy an automatic watch winder and place the watch inside, saving you from having to manually wind it for no reason.

　　Top-tier replica automatic mechanical watch recommendations

　　[Top Grade] Jaeger-LeCoultre Master Ultra Thin Series Q1378420

　　Price: (Please contact customer service for the latest price)

　　Series:Master collection

　　Movement: Automatic mechanical movement

　　Strap: calfskin strap

　　Case: Stainless steel

　　Clasp: Folding clasp

　　Crystal: Sapphire crystal glass

　　Diameter: 39MM

　　Review:

　　◆ This is a timepiece favoured by senior professionals, released specifically to mark the 20th anniversary of the Master Control series.

　　◆ The dial is silver-white, with three inner sub-dials in a higher-brightness silver, rather than pure white.

　　◆ The sapphire crystal has a slight curve, which is why the tip of the minute hand has a slight downward angle.

　　◆ The crown on the side has only one position; pulling it out allows you to set the time. When not pulled out, turning it clockwise allows for manual winding.

　　◆ All three sub-dials are fitted with small blue hands, in a deep shade of blue that often looks black under average lighting conditions.

　　◆ The overall colour and material design of this stainless steel watch make it suitable for wearing during both work and leisure time.

　　Automatic mechanical watches require proper care and maintenance to ensure accurate timekeeping and extend their lifespan. If you are interested in purchasing a top-tier replica automatic mechanical watch, please scan the QR code to add our WeChat for enquiries.

To view more one-to-one replica watch models, please click here:One-to-one replica luxury watches、1:1 replica watches、Replica world-famous watches、High-grade replica world-famous watches、Replica luxury watch、High-grade replica Swiss watches、Fine replica luxury watches、Fine replica world-famous watches、Fine replica Swiss watches

Related reading:

[ZF Factory Perfect Edition] Jaeger-LeCoultre Master Ultra Thin Series Q1358420 Watch

What to do if an Enicar mechanical watch stops running?

How much is a high-grade replica Omega mechanical watch?

So this is how you maintain a mechanical watch! Mechanical watch maintenance tips

Is the accuracy of replica mechanical Panerai watches high?