Why High-Quality Replica Tudor Watches Require Complete Dismantling, Cleaning, and Relubrication Maintenance

　　Many watch wearers do not understand why their timepieces must be taken to a repair shop periodically for full dismantling, cleaning, and relubrication. Below, we explainreplica Tudor watchWhy complete dismantling, cleaning, and relubrication maintenance is necessary.

　　Why do watches need to be dismantled, cleaned, oiled and serviced?

　　First, during the use of a watch, the lubricating oil applied to the components will gradually evaporate and dry up over time. The mutual friction of the gears produces fine metal debris, which increases rotational resistance. Dust and fibres continuously invade through the gaps in the case, causing dirt to accumulate within the mechanism. Therefore, after a period of use, a watch needs to be dismantled, cleaned and oiled.

　　How often should a watch be oiled? There is no one-size-fits-all answer to how frequently a watch should be oiled, as it is directly related to the degree of sealing of the case. Water-resistant watches have better case seals, making it difficult for dust to enter the movement, so the interval for dismantling, cleaning and oiling can be longer. Cases without water-resistant structures generally have poorer sealing, allowing dust and grime to easily enter the movement through case gaps, meaning the interval for dismantling, cleaning and oiling must be shorter.

　　How often should a watch be dismantled and cleaned?

　　Some say that a watch should be dismantled, cleaned and oiled every one or two years, but this claim is not scientific. During the use of a watch, it only needs to be dismantled, cleaned and oiled when you notice it running increasingly slow or providing less running time after being fully wound.

　　A normally running watch that has not been dismantled, cleaned and oiled for about four years is best serviced with a dismantling, cleaning and oiling. This is because although the mechanism still keeps normal time, once the lubricating oil evaporates and dries up, continued operation easily causes component wear. If you wait until the mechanism operates abnormally before servicing, certain parts may suffer damage or increase the difficulty of repair.

　　Dismantling and servicing a watch at regular intervals is intended to keep timekeeping more precise and to prevent faults such as stoppage, intermittent stopping or water ingress.

Related reading:

How often should a watch be dismantled, cleaned and oiled?

How often should a Panerai watch be wound?

How many turns of the crown are needed to fully wind a Tudor watch?

Exploring British craftsmanship: Tudor Heritage Black Bay

A sibling rivalry: is the Rolex Submariner better, or the Tudor Black Bay?