How to manually wind a replica watch correctly?

　　Many people do not want to wear a watch over the weekend, leaving it at home for two days only to find it has stopped, meaning it needs manual winding. Alternatively, sitting in front of a computer all day for work lacks physical activity, and watches often stop by the next morning. Even if they do not stop, they can run significantly slower. Why does this happen? Below, we discussReplica watcheshow to correctly manually wind it.

　　Is manual winding harmful?

　　Mainspring: To be precise, manually winding an automatic mechanical watch does not affect its mainspring. This is because our automatic watches feature an automatic slipping function once fully wound. This feature greatly mitigates the negative impacts after the mainspring is tightened, so we do not need to worry about the automatic protection locking up after manual winding. However, manual mechanical watches are different; their mainsprings use a locking mechanism that cannot be wound any further once full.

　　Gear train: Structurally, they use the intermediate wheel to drive the ratchet and crown wheels to wind the watch.

　　Based on observations from numerous repairs, there is generally no damage to the manual winding gear train. Because the manual winding gear train bears a heavier load, it employs relatively thicker and sturdier gears, barring rare instances where gears are damaged by forced winding while jammed.

　　However, since many manually wound watches feature a locked mainspring, applying too much force easily damages the mainspring. Mainspring damage caused by overwinding is indeed very common.

　　However, saying there is zero damage is impossible, as mechanical transmission inevitably involves wear and tear. Yet this wear is minimal; provided regular servicing is carried out, components practically never suffer from natural damage.

　　Correct usage of replica watches

　　If an automatic mechanical watch stops due to low physical activity, manual winding can be used. There is no need to push too fast or worry about overwinding. Of course, if a watch has been left unused for several years, attention is required. Most movements reach a fully wound state after approximately 30 turns of the crown.

　　The winding process for manual mechanical watches requires care. Men's watches typically take around 30 turns to fully wind, while women's watches require slightly fewer; caution is needed once 20 turns are reached. Winding must be done slowly, without pinching the crown too tightly. Once significant resistance is felt or the crown can no longer be pushed, stop immediately.

Related reading:

How to set the time on a replica Chanel watch?

How do mechanical watches store power?

How do you wind an automatic mechanical watch?

How to make a replica Longines mechanical watch keep time more accurately?

What is the permissible timekeeping error range for a mechanical watch?